How to Install Key-Locking Inserts with a Pneumatic Installation Tool

Pneumatic Key-locking Inset (alternative to Keensers® inserts)) Installation Tool

Installing a few Key-locking Inserts (alternative to Keenserts® inserts)? A manual installation tool and hammer can do the job. Installing hundreds on a production run or repeating the same job week after week? A pneumatic tool can save time and reduce manual effort, especially when you can install many inserts of the same size and configuration with one setup.

In this blog, we’re taking a closer look at the Pneumatic Key-locking Insert Installation Tool, how it works, and how it can help simplify the installation of Key-locking Insert

A pneumatic Key-locking Insert installation tool uses compressed air to help automate the process of installing non-self-locking Key-locking inserts into a prepared hole.

Unlike manual installation methods, which typically require separate steps to thread the insert into place and drive its locking keys, the pneumatic tool performs both operations using a single-button control.

MF Supply offers two hydro-pneumatic tools for compatible key-locking inserts, including alternatives to Keenserts® inserts.

MF Supply part numberInch internal thread sizesMetric internal thread sizes
KEENTOOLPNEUMATIC-2#10 through 3/8 inchM5 through M10
KEENTOOLPNEUMATICRS2#10 through ½ inchM5 through M12

Both tools require a size-specific nose assembly, also called an installation tip, sold separately. Match it to the insert’s internal thread size, external diameter, and configuration.

Installing a ½-inch insert? Our pneumatic installation tool under product code KEENTOOLPNEUMATICRS2 handles IDs from #10 through ½ inch and M5 through M12.  Pro tip: Confirm the correct tool and matching ½-inch nose assembly before ordering.

Use these tools with inserts without an internal self-locking feature. Internally self-locking styles, identified by an L suffix in the applicable series, require a different installation method.

The installation process begins much like traditional manual installation. The base material must first be prepared according to the insert manufacturer’s specifications.

  1. Prepare the hole. Drill, countersink, and tap to the insert manufacturer’s specifications. Pro tip: Some base materials may also require pre-broaching.
  2. Set up the tool. Fit the correct nose assembly and set the stroke force for the insert and base material according to the manufacturer’s instructions. On the tool shown in the video, turn the base knob clockwise to increase force or counterclockwise to decrease it.
  3. Install the insert. The threaded mandrel turns the insert into the prepared hole. Press the trigger so the anvil drives the external locking keys into the base material, then release the trigger to retract the tool.
  4. Inspect the installation. Check the seated insert and driven keys against the manufacturer’s requirements. When you change insert sizes, fit the matching mandrel and anvil.

Please note that pneumatic installation tools are available only for non-self-locking key-locking inserts with internal thread sizes M5 – M12 and #10 – ½ inch. Always follow the manufacturer’s installation instructions, including the appropriate hole preparation, tool settings, and inspection requirements.

See how to operate the trigger, adjust stroke force, and change the nose assembly. Jump to 1:48 for the side-by-side comparison of manual and pneumatic installation methods.

Watch the Full Demonstration | Jump to the Comparison

Product Key features include:

  • Single-button operation: Controls the installation sequence using one button.
  • Inch and metric compatibility: Supports specified non-self-locking key-locking inserts with #10 through ½ inch and M5 through M12 internal threads.
  • Adjustable operation: Allows adjustments based on insert size and base material.
  • Interchangeable nose assemblies: Uses size-specific nose tips for different insert configurations.
  • Ergonomic design: Designed to support consistent operation during repetitive installation tasks.

Important: Size-specific nose tips are sold separately and are required for use with pneumatic installation tools. Be sure to select the appropriate nose assembly for the insert being installed.

If you’re looking for a pneumatic installation tool for Key-locking Inserts, our pneumatic power tool may be a suitable alternative.

Our pneumatic installation tool can be used as an alternative to the following part numbers:

  • 3352PT1
  • 3700-MIP1
  • 3700-MIP2

Before selecting an alternative, please verify the insert size, thread configuration, required nose assembly, tool operating specifications, and overall compatibility with your application.

1. Can a pneumatic installation tool be used to install Keenserts® inserts?

Pneumatic tools designed for non-self-locking Key-locking Inserts may be suitable for installing certain Keenserts® inserts. However, compatibility depends on the specific insert design, size, and required tooling. Always verify compatibility before use.

2. What is the difference between manual and pneumatic insert installation?

Manual installation generally requires a universal installation tool and a hammer to properly thread the insert into place and drive its locking keys. Compatible pneumatic tools simplify this process, making them particularly useful for repetitive or higher-volume installations.

3. Do pneumatic Key-locking Insert installation tools require different tips?

Yes. Pneumatic power tools use size-specific nose assemblies for different insert configurations. The correct nose assembly must be selected before installation.

4. When should I consider using a pneumatic installation tool?

Pneumatic installation tools are worth considering for high-volume or repetitive applications involving hundreds or thousands of Key-locking Inserts, particularly when reducing manual installation steps can help improve workflow efficiency.

MF Supply offers a broad selection of Key-locking Inserts, including alternatives to Keenserts® inserts, as well as pneumatic installation tools for precision manufacturing, machine shops, aerospace, defense, and industrial applications.

Whether you need inch, metric, or Mil-Spec Key-locking Inserts, or are looking for a pneumatic installation tool, our team is here to help you find the right products for your application.

Cross-referencing a pneumatic installation tool?

Looking for an alternative to 3352PT1, 3700-MIP1, or 3700-MIP2? Send MF Supply your insert part number, quantity, and any documentation requirements. We’ll help confirm the tool’s operating specifications and nose assembly compatibility, then quote the tool, nose assembly, and inserts together.

After all, “Finding the right screw for you” isn’t just our tagline. It’s our commitment to you!


Trademark Notice & Disclaimer

KEENSERTS® is a registered trademark of Huck Patents, Inc. and/or Howmet Aerospace Inc. MF Supply is an independent distributor with no affiliation with or endorsement by the trademark owners. References to KEENSERTS® are for descriptive compatibility and cross-referencing. Products offered as alternatives are functional equivalents unless expressly identified as original KEENSERTS® products. Verify compatibility for each application.


Book a one-on-one consultation with our President, Robin, to discuss how MF Supply can help you solve your Industrial Sourcing, Fastener, and Safety concerns.


MF Supply Work With Us

Your Purchasing Department’s Secret Weapon!
Here are 5 reasons to buy from MF Supply

  • We Source and Deliver What Others Can’t, Faster Than You Imagined – With speedy solutions for elusive parts and lengthy delivery times – We’ve got you covered with both custom-made specials (send us your prints!) and hard-to-source options, quickly and at a fair price.
  • Cost-Effective Functional Equivalents to OEM Brand Fasteners-Why Pay More? – Reduce lead times and costs with the same quality and same performance.  Try us for alternatives to brands like McMaster-Carr, MSC, Misumi, PEM, and RAF and experience unmatched savings! Same form, fit and function for less.  
  • Huge Selection of Certified and Commercial Hardware with Same-day Shipping Available for Countless Items – We source and stock standards, specials, commercial, Mil-Spec & OEM brands in inch and metric sizes. Standards include AN, NAS, MS, IFI, ASTM, ASME, DIN, ISO, JIS. We are sourcing experts for inserts, certified Mil-Spec parts and anything in stainless steel. Many parts are available with manufacturers’ certifications, including DFAR, ROHS and CoC. Trust us to ship on-time from our national distribution centers. 
  • A User-Friendly, 24/7 Online Shopping Experience – Enjoy a 24/7 online shopping experience with easy-to-use filters, detailed product information, and a constantly updated technical directory. Sign up now for a seamless experience! 
  • WBE/WOSB Certified Woman-Owned Small Business – As a certified Woman-Owned Small Business, we support your diversity goals. Trust us to meet your fastener and sourcing needs with expertise and efficiency [Cage Code 58QG4].  

MF Supply is a WBE/WOSB certified supply chain partner to business, industry and government.  We are sourcing experts and stocking distributors of Hardware, Precision & Mil-Spec Fasteners and Safety supplies.  For more than 50 years, we have been supplying manufacturers in the electronics, industrial, commercial, aerospace and military markets with the full range of fastener products and services.  Our Cage Code is 58QG4 and our registered name is RL Supply Inc dba MF Supply. 



Leave a Reply