Buyer’s Guide to Set Screws Updated for 2023Posted: March 22, 2023 Filed under: Fasteners, Inch, Metric, Set Screw, Socket Products, Socket Set Screws, Socket Set Screws Cone Point, Socket Set Screws Cup Point, Socket Set Screws Flat Point, Socket Set Screws Half-Dog Point, Socket Set Screws Knurled Cup Point, Socket Set Screws Nylon Tip, Socket Set Screws Oval Point, Threaded Fasteners | Tags: ASME B18.3, Cone Point, Cup point, Fasteners, Flat Point, Half-Dog, Hardware, Knurled Cup Point, Mechanical Fasteners, Nylon Tip, Oval Point, Set Screw, Socket Set Screws, Threaded Fasteners 1 Comment
8 Things to Know When Buying Set Screws
Our goal is to help simplify the buying process for this sometimes-complex category of fasteners by detailing the most critical things you must know when buying Set Screws.
1. What is a Set Screw?
A Set Screw is a fully threaded headless screw that is traditionally classified within the socket family of products. It is generally used to fasten an object within or against another object by exerting pressure rather than holding parts together with threads. It is normally used without a nut.
2. Who uses Set Screws?
Set Screws are used in many industrial and mechanical devices, particularly in assemblies with rotating items such as pulleys or wheels, where a component is locked onto a shaft. Designed to fasten one object inside another, Set Screws pass right through a threaded hole in the outer object and are tightened against the inner object. Pretty cool, right?
3. What materials and platings are available?
The most common Set Screw material options are alloy steel and stainless steel. Brass is a less popular and less available option.
The most commonly available material is hardened alloy steel with a thermal black oxide finish, as per ASME B18.3 and a Rockwell hardness of C45-53.
Stainless steel grades 18-8/303 and Metric A2 are also commonly available. Other exotic materials such as brass, 316 or A4 stainless steel, 4140 steel, 416, A286 or special finishes including zinc plating may be available for special order with a lead time.
Socket Set Screws come standard with 3A thread fit. Some sizes and materials may be available with nylon patches or pellets.
Set screws with a slotted drive are made with a 2A thread fit.
4. What sizes are available?
In our experience, Set Screws are most commonly available in sizes 2-56 through 1″ diameter in imperial and M2-M24 in metric diameters with a hex socket drive on one end and a cup point on the other.
5. What information should I provide to get an accurate quote?
The easiest way to order is by part number. The most popular manufacturers of Set Screws are Holo-Krome, Blue Devil and Misumi, along with the national catalog houses like McMaster-Carr, Grainger and MSC Industrial.
If you don’t have a part number, you’ll need to provide the diameter and thread, the body length, drive and tip type, material and plating.
6. Other than size, material and plating, what other options are available?
The other main considerations when selecting Set Screws are the drive and the point. We offer a comprehensive look at your options below.
Drives: The most common and readily available drive style is a hexagonal socket drive (think Allen wrench), however, Set Screws may also be available in slotted, six-lobe (Torx) and spline drives for certain sizes.
Points: This is where it gets interesting. The point of the Set Screw determines its function. Seven (yes, seven!) main points are available, each serving a slightly different purpose.
- Cup – The most common style, which is slightly cupped to meet the surface of the inner object. Used for permanent or semi-permanent installations, the Cup point provides a high level of security and control. (Metric DIN 916)
- Knurled Cup – A variation of the Cup point, this style has knurls for a stronger grip.
- Cone – A very sharp point wedges into the inner object to hold it permanently in place. With the highest holding power of all Set Screw styles, the Cone point is used for permanent settings. Note: Cone point Set Screws may cause damage to the inner object which might not be desirable in some applications. (DIN 914)
- Flat – Designed for flexibility when frequently resetting or relocating objects on hard steel shafts where minimal damage to the shaft is desired. Affordable and easy to install, Flat point Set Screws can be moved without damaging the inner object. (DIN 913)
- Oval – The Oval point is the inverse of the Cup point. The small rounded contact surface allows slight adjustments without loosening the screw and causes minimal surface damage to the inner object. The Oval point Set Screw is the most practical type for situations where the inner and outer objects require regular adjustments.
- Half-Dog – Sometimes offered as a Full-Dog point, its protruding tip locks within a mating hole or slot in the shaft, for permanent setting. Half-dog/Dog points are sometimes used instead of a dowel pin. (DIN 915)
- Nylon tip – Resembling a Half-Dog point, the soft nylon tip is used to grip curved or textured surfaces.
7. What other factors should I consider?
We’ve covered the most common variables including head style, diameter and thread, length, material and plating or finish. Does your project specify Inch (Imported or Domestic), Metric, OEM brand or Mil-Spec? Here are a few of the other considerations you might be faced with based on the project and the bill of materials:
We’ve covered the most common variables including head style, diameter and thread, length, material and plating or finish. Here are a few of the other considerations you might be faced with based on the project and the bill of materials:
Do you need domestic parts (i.e. Holo-Krome) or will imported screws work?
Do you require parts that conform to a specific mil-spec number, such as AN565, NAS1081, MS18063, MS18064, MS18065, MS18066, MS18067, MS18068, MS21342, MS51017, MS51021, MS51022, MS51023, MS51025, MS51026, MS51029, MS51031, MS51033,MS51038, MS51040, MS51045, MS51047, MS51053, MS51476, MS51477, MS51963, MS51964, MS51965, MS51966, MS51973,MS51974, MS51976, MS51977, MS51981, MS51982 with their exacting tolerances and traceability, or will standard commercial parts work?
Does your bill of materials call out a specific manufacturer, such as Holo-Krome or Blue Devil?
Make sure you have the correct installation hardware (Allen wrench or hex key) to go along with your Set Screws.
8. What level of certification is required?
Generally, a Certificate of Conformance or a COC is sufficient for your customer. Full certification with material certs, DFARS certification and test reports are often available for USA-made and mil-spec parts for a fee.
- The full range of commercial and Mil-spec parts, including parts that are DFARS and ROHS compliant.
- Brand names (Holo-Krome, Blue Devil) and generic equivalents.
- Custom-made parts per print in non-standard and exotic materials and finishes.
For more detailed information about Set Screws, to request a line card, or to send an RFQ, visit our website. And if you don’t see what you need listed, as always, ask us. “Finding the right screw for you” is our tag line after all!
Book a one-on-one consultation with our President, Robin, to discuss how MF Supply can help you solve your Industrial Sourcing, Fastener, and Safety concerns.
Six Reasons To Buy From MF Supply
- Full eCommerce Enabled Website With Technical Manual Available 24/7 – Visit our website and Create a New Account, track online orders, browse our product catalog, check technical specs, subscribe to our blog, or buy online. We are adding items and improving functionality daily!
- Same Day Shipping From The USA – Our hardware products are in stock and ship to you directly from our USA based distribution centers.
- Functional Equivalents To Expensive Brand Names- We stock and source alternatives to brand name fasteners, reducing long lead times and saving you money.
- Creatively Solve Problems – We are sourcing experts, offer competitive pricing and specialize in finding hard to find parts and reducing long deliveries.
- One-Stop Shopping On Certified Hardware – We stock and source a full line of fasteners including Mil-Spec, DFARS compliant and other industrial products.
- WBE/WOSB Woman Owned Certified Small Business – To meet your diversity & set-aside needs.
MF Supply is a WBE/WOSB certified supply chain partner to business, industry and government. We are sourcing experts and stocking distributors of Hardware, Precision & Mil-Spec Fasteners and Safety supplies. For more than 50 years, we have been supplying manufacturers in the electronics, industrial, commercial, aerospace and military markets with the full range of fastener products and services. Our Cage Code is 58QG4 and our registered name is RL Supply Inc dba MF Supply.
I love that you mentioned that you need to consider the materials that you are using the screws on when you are looking to buy some. My wife and I are working on some home projects, and will need screws for them, so it will be important for us to know that we are getting the right ones. When we look for some, I will be sure to consider the materials that we are using them on.